When you buy a ProWarm™ cable and thermostat, as part of one of our kits, you get the rest of the kit accessories thrown in for free!

ProWarm™ Electric Underfloor Heating cable kits provide a reliable and effective underfloor heating system that can work with tiles and many other floor coverings (installation methods differ, please call us for advice).

Each ProWarm™ underfloor heating system and thermostat comes with a Lifetime Warranty. Please note this Warranty does not cover HeatMiser and AUBE thermostats as these brands are covered by their own manufacturer's warranty.

Please ensure all Safety Guidelines are adhered to during and after installation of this product.

ProWarm™ Underfloor Heating kits contain everything you need to install them - all packed and supplied in one box complete with full colour instructions.

Please choose an electric underfloor heating cable kit that will cover 90% of your floor area. It is best to order slightly less than you need than have too much as the cables CAN NOT be cut or shortened.

Electric underfloor heating kits contain the following items:

• ProWarm™ Underfloor Heating Cable Drum (or 2 drums if over a 180 linear metres)

  Our underfloor heating loose cable systems are the ideal solution for those complicated floor areas where a mat is not suitable, our systems are all rated at 10w per linear meter, this means the closer you space the cable the higher the output.

• Digital thermostat - Choice of programmable digital thermostat with floor temperature probe. All Prowarm™ digital thermostats come with a Lifetime Warranty*.

• Floor Primer - Prowarm™ Ultraprime is a high performance primer - increasing bond strength and flexural performance whilst reducing water penetration. It has been designed to be a universal priming/sealing agent and is suitable for a variety of building substrates including plaster, timber, brick and block work.

• High Quality Roller - For applying floor primer to sub-floor

• Adhesive Tape - To assist in holding mat or cable in position when installing

ProWarm™ Underfloor heating cable is a series type heating cable of with a twin conductor with cold lead of 3.0M on one side. The cable has resistance heating wire provided with a primary insulation of fluoropolymer then covered with metal shielding and final outer sheath. The final outer diameter of twin conductor cable is 2mm.

The Hot and Cold lead junctions are uniquely designed to make them 100% foolproof.

Standards - Meets all test requirements of IEC 60335.

Approvals -CE certified by SGS

Cost-effective - Under floor heating provides heat where required, resulting in optimal heat utilization and minimal losses.

Flexibility - Can be laid on any area, or any floor layout.

Comfort - Close and uniform spacing of heating cables, associated with thermostat controls to select temperature requirements, provides higher comfort.

DIY - ProWarm™ underfloor heating systems are designed to be easy to install, with clear instruction manuals professional technical support and amazing back up.

Range - A wide range of heat loads and sizes ensure suitability to all kinds of floorings.