The Touch-E is a programmable electric floor heating thermostat, capable of switching up to 16A. A 3M remote floor sensor is included.

The Touch Models can be set to work in Non Programmable, 5/2 Day or 7 Day Programming ensuring that you can select the right programming choice for your requirement.

Blue Backlight Display

The Touch series incorporate a blue back light, which turns off automatically when not in use.

Self Learning Preheat

The Touch Series offer optimum start, a feature were the thermostat calculates the amount of heat up time required.

Temperature Hold Facility

The Temperature Hold feature, standard on all Touch Series, allows for a desired set temperature to be set for a specific duration. After this time has expired, the thermostat will return to its normal program.

Key Locking

Key locking is standard on all of the Touch Series and is an excellent way to reduce tampering of the heating system.

• Flexible Programming
• Optimum Start
• Holiday Function
• Key Lock Function
• Temperature Hold
• Modbus Connection
• Remote Air Sensor Function
• Floor Sensor Mode
• Wireless Sensor Function
• Floor Sensor Included
• Flush mounting

Max Current	3A
Supply	230v
Dimensions (L,H,D)	100x110x16.5mm
Temperature Range	05-35C
No. Heating Levels	4

• Carefully separate the front half of the thermostat from the back plate by placing a small flat head terminal driver into the slots on the bottom face of the thermostat.
• Place the thermostat front somewhere safe. Terminate the thermostat as shown in the wiring diagram above.
• Screw the thermostat back plate securely into the back box.
• Clip the front of the thermostat back onto the thermostat back plate.

Important Do not install near to a direct heat source as this will affect functionality.

Important Do not push hard on the LCD screen as this may cause irreparable damage.

This Touch-E thermostat is designed to be flush mounted and requires a back box of 35mm (minimum depth) to be sunk into the wall prior to installation.