Kiilto Pro XPU Adhesive Sealant - White 290ml
Overlay Panel Jointing Glue is applied as a flat bead to the middle of the board's edge using the nozzle supplied with the cartridge.
The special nozzle dispenses just the correct amount of adhesive for a board thickness of 10 and 12.5 mm. The nozzle will need to be cut to the appropriate length for boards with a thickness of 15 and 18mm (this increases the amount of adhesive applied). The second board is then butted tightly against the first one and fixed into position.
At a room temperature of 15 to 25 degrees the adhesive will be fully cured after 18 to 36 hours.
Low in harmful substances and emissions – free of plasticizers and silicone, tested by eco-Institut Cologne
Easy to process – bonds and joints at the same time, easy to apply on walls ceilings.
Special applicator nozzle – for the correct quantity of adhesive, right to the middle of the joint.
High joint strength – no cracks in the joints when applied correctly, full panel strength even for un-supported horizontal joints.
Info
Fermacell™ Jointstik 310ml Tube is an easy to use bonding and jointing adhesive used for joining MegaWarm® Solid18 panels (800x600x18mm)
A cartridge covers the joins of up to approximately 8 boards using a 3mm bead. It is low in harmful substances and emissions and is a hazard label-free adhesive. Offering high joint strength and an easy to apply nozzle, Fermacell™ Greenline Jointstik provides full board strength even for unsupported horizontal joints.
This adhesive expands when in contact with the air so it should be applied to the edge of the board and not in the centre of the gap. Please see instructions on the product for further information regarding correct application. For any assistance or information regarding any of our products, contact a member of our experienced sales team today
