Heatmiser Slimline-E - Electric Floor Heating Thermostat
Description
The Heatmiser Slimline-E underfloor heating thermostat has been designed specifically with electric under floor heating in mind. It is compatible with all electic floor systems with a total load less than 16A.
The Heatmiser Slimline-E thermostat allows you to control the system in a variety of ways;
Self Learning Preheat
The Slimline Series offer optimum start, a feature were the thermostat calculates the amount of heat up time required.
Temperature Hold Facility
The temperature Hold feature standard on all Slimline Series allows for a desired set temperature to be set for a specific duration. After this time has expired, the thermostat will return to its normal program.
Key Locking
Key locking is standard on all of the Slimline Series and is an excellent way to reduce tampering of the heating system.
Flexible Programming
The Slimline Models can be set to work in Non Programmable, 5/2 Day or 7 Day Programming ensuring that you can select the right programming choice for your requirement.
Blue Back Light
The Slimline series incorporate a blue back light, which turns off automatically when not in use.
- Holiday Feature
- °C / °F selectable
- Frost protection with adjustable temperature setting
- Remote Control Option (RM1)
- 16A Switch rating (3,680 watts)
- Floor sensor included
- Floor, Air or Floor & Air sensors
Specification
Max Current 16A Supply 230v Dimensions (L,H,D) 99x86x15mm Temperature Range 05-35C No. Heating Levels 4 Weight 195g Installation
- Carefully separate the front half of the thermostat from the back plate by placing a small flat head terminal driver into the slots on the bottom face of the thermostat.
- Place the thermostat front somewhere safe. Terminate the thermostat as shown in the wiring diagram above.
- Screw the thermostat back plate securely into the back box.
- Clip the front of the thermostat back onto the thermostat back plate.
Important Do not install near to a direct heat source as this will affect functionality.
Important Do not push hard on the LCD screen as this may cause irreparable damage.
This Slimline Series thermostat is designed to be flush mounted and requires a back box of 35mm (minimum depth) to be sunk into the wall prior to installation.
