ProWarm™ floating floor panels (1200mm x 1200mm x 25mm) are ideal for installations where a finished floor is required within a minimum time scale. No wet trades are needed, making it a very fast system to install and means no waiting time for screed to dry.

Our floating Floor system is suitable for domestic as well as commercial applications.

Panels can be installed onto existing suitable subfloors ie: solid concrete/screeded floors or suitable 18mm structurally sound wooden subfloors such as chipboard, plywood or floorboards.

EPS panels are pre-routed in different patterns and are covered with a high tech aluminium foil. The foil distributes the heat evenly across the entire floor surface, the warm up time is drastically reduced compared to traditional wet screed systems, ProWarm™ European Standard Pex-Al-HDPE pipe sits flush inside the ProWarm™ insulation panels ready for your suitable wooden floor covering on top.

Suitable floor coverings include engineered wooden floors, T+G floorboards, or 18mm chipboard (to receive suitable low tog carpets) please check with flooring manufacturer that the floor covering is suitable to use with this system.

PLEASE NOTE: These panels are not suitable for tiling on to.

(please use our solid floor panels if you intend to use tiles as your floor covering)

PLEASE NOTE: Boards will be cut in half due to courier restrictions if less than 14 boards are ordered.

Material	Expanded Polystyrene - Grade EPS100 (BS EN 13163)
Panel Dimension	1200mm x 1200mm x 25mm
Pipe Centre	150mm / 200mm
Aluminium Foil Thickness	45 microns
Thermal Conductivity	0.036 W/mK
Compressive Strength @ 10% compression	100 kPa
Compressive Strength @ 1% compression	45 kPa
Fire Classification	Euroclass F