ProWarm™ foiled faced in joist/batten system
Description
These all in one easy to fit panels (1200mm x 350mm x 50mm) are an ideal solution to fix between existing joists onto battens, they can also be fitted between battens on concrete subfloors, giving you a fast inexpensive solution for installing our pipework (pipework is set at 200mm centers).
Made from EPS (Expanded Polystyrene).
These panels replace the need for using separate spreader plates and separate foil faced insulation systems.
Suitable for 15mm and 16mm pipe
Specification
Expanded Polystyrene - Grade EPS100 ( BS EN 13163 ).
Panel Dimensions 1200mm x 350mm x 50mm Panel Thickness up to 125mm ( in 1.0mm increments ) Aluminium Foil Thickness 45 microns Thermal Conductivity 0.036 W/mK Compressive Strength 100 kPa @ 10% compression Compressive Strength 45 kPa @ 1% compression Fire Classification Euroclass F Suitable Pipe Size 15mm and 16mm Installation
To install the injoist batten system you will begin by securing battens to the sides of the joist with the top of the batten 50mm below the top of the joist. This will allow the insulation to sit flush with the top of the joist.
The pipework can then be placed withing the preformed grooves within the board.
You can finish the installation of this system by installing the finished floor.
